European Facility For Airborne Research

European Facility For Airborne Research May 23, 2018, 03:29

Instrument: Rosemount PT100

Name Rosemount PT100
Acronym PT100
Manufacturer Rosemount
Operated by DLR
Operated onboard

Instrument type

Name Temperature sensor (in situ)
Acronym Temperature

Principle of operation

Measured parameter Temperature
Operating principle

Rosemount:
Platinum resistance wire sensor. The calibrated temperature is referred to as "total temperature". It must be corrected for the effects of dynamic heating of air entering the sensor housing and also for the possible effects of anti-icing heating applied to the housing.

Measurement(s) Thermodynamics

Dimension and weight

External dimension
Weight 0.0

Performance

Operating mode In situ
Range

Resolution

Sensitivity

Accuracy

Bandwidth

Modifications

Operational restriction

Operational requirements

Certification approvals

Additional information

Temperature measurements on the Falcon are based on resistance wire (Pt100/Pt500) temperature sensors mounted in commercially available TAT housings mounted under the aircraft nose.
The high speed open wire Pt100 is used for turbulence measurements and a slow Pt500 sensor. Sensor is calibrated to better than 0.1 deg between -70 and +50 deg.

Access, host and processing

Access

Could also fit on any aircraft having the following characteristics

General description

Title Author Type Related
No documents.
Back to top
EUFAR
EU

This project has received funding from the European Union's Seventh Framework Programme for research, technological development and demonstration under grant agreement no. 312609

Copyright © 2018 EUFAR All rights reserved.